Multiroom zones
Sonos or a matrix amp so each room plays independently or all together.
Keil Electric service
Sonos, Sonance, and architectural in-ceiling speakers: music in every room, on the patio, and in the theater, wired cleanly by a licensed shop that can also power the amps and racks it runs on.
Keil Electric installs whole-home and multiroom audio across San Diego County and the Austin metro: in-ceiling and in-wall architectural speakers, outdoor and patio zones, and home-theater sound, driven by Sonos or a rack amplifier. As electricians we run the speaker wiring in-wall and add the dedicated circuits and rack power that a serious system needs. Written quote first, warranty five years to lifetime.
Same scope at any of our shops. Pick the shop that covers your area and we will route you to the right crew.
Sonos or a matrix amp so each room plays independently or all together.
In-ceiling and in-wall speakers that disappear into the room, wired back to the rack.
Weather-rated patio zones with wiring run below grade or in-wall, plus home-theater surround layout and the AVR/amp on proper power.
Amps and streamers on a dedicated, ventilated, surge-protected circuit.
Priced by zone count and speaker type. A two-room Sonos setup is a short job; an eight-zone architectural system with an outdoor zone, a theater, and a powered rack is a multi-day build. Running speaker wire inside finished walls and powering the rack is where the electrician earns the job. Fixed written number before we start; trip charge applies.
We look at what you have, what you want it to do, and what is already in the walls.
Everything modern runs on the network, so we scope that first.
A fixed number, in writing, before any work.
Many low-voltage jobs do not need one; circuit or panel work sometimes does.
One licensed crew handles the power and the low-voltage together.
We set it up, test it, and show you how to run it before we leave.
We install equipment we'd put in our own homes. If you have a preferred brand, tell us, we'll work with it.
No permit required for this work in most jurisdictions. We confirm with the local building department before starting.
Written warranty: 5-year on outlets, fixtures, and EV chargers; 10-year on wire and breakers; lifetime on panelboxes and surge protection. Parts and labor. Transfers with the home.
An amp rack pulls real current: stack it on a shared bedroom circuit and you get heat, hum, and tripped breakers. We put the rack on its own ventilated, surge-protected circuit and keep speaker runs away from line voltage to kill the buzz.
Real work from our San Diego and Austin shops. Same standards, same warranty, every job.
For whole-home audio & sound, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.
Most whole-home audio calls start when you are planning the space around how it should sound: a renovation, a new build, a patio you are finishing, or a media room that deserves real speakers instead of a soundbar. The earlier we walk it, the cleaner the wiring. Bringing us in before the drywall closes means speaker runs go inside the walls and ceilings instead of on them, and the equipment rack gets its own power from the start. We are happy to plan zones at the design stage even if the install is still months out.
A walk of the property with attention to where sound should live, which rooms, the patio, a theater, the wiring paths back to the equipment rack through attic and open walls, where the rack itself will sit and how it gets powered and cooled, and whether your network can carry streaming to every zone. Where a run crosses a finished wall or ceiling, we find the cleanest path before we cut. The estimate is fixed for the scope as walked; change orders only happen for genuinely new findings, and you hear about them first.
Yes, architectural in-ceiling and in-wall speakers sit flush and paint over. We run the wire back to the rack inside the walls.
Yes, we build it in zones. Each room and the patio can play its own thing or all sync together.
Yes, weather-rated speakers on their own zone, with wiring and any power run to code for wet locations.
Yes, Sonos integrates with the TV audio and your voice platform; for the full automation hub see our Smart Home page.
Because the wiring is the job. In-wall runs, a powered rack, and an outdoor circuit all sit in an electrician licensed scope; an AV-only crew has to sub that part out or skip it.
Tell us which rooms should have sound. We will wire the zones in-wall, power the rack, and tune it before we go.