[ TX LIC #40645 · GEORGETOWN ] AUSTIN METRO

Georgetown, TX

Electrical panels and circuit breakers in Georgetown, TX

Licensed electrical panels and circuit breakers from our Austin shop for Georgetown homes and businesses. Real person on the line, licensed electrician on every job.

Request an estimate Read the scope

JOB · LOCAL TEAM

Electrical Panels and Circuit Breakers

Georgetown, TX

Served by Keil Electric Austin

(888) 442-5345

TX License 40645

5.0 from 121 Google reviews

Direct answer

Keil Electric Austin provides electrical panels and circuit breakers in Georgetown, TX. Panel repair, replacement, and 100A to 200A service upgrades. Individual breaker replacement, AFCI installs, and known-recall Panel Upgrade (Federal Pacific, Zinsco, Challenger).

Licensed Electrical Panels and Circuit Breakers electrical panels and circuit breakers across Austin From the Keil Electric Austin licensed electricians

01 - SERVICE AREA

Georgetown service area.

From our Austin shop.

We dispatch from 1511 Brandi Ln Unit D, Round Rock, TX. Most days we're already in the area on another job. After-hours emergencies, we roll a truck.

Response time

Austin: Most days we're already in the area. Same-day appointments when capacity allows. After-hours emergencies dispatched when a licensed electrician is available, a real person at the local shop answers and tells you the ETA on the call.

Call now

Electrical Panels and Circuit Breakers in Georgetown, TX runs out of our Round Rock shop. The crew works the Austin metro daily and covers Georgetown on the regular dispatch list. For electrical panels and circuit breakers in Georgetown the variation between two jobs can be significant: panel age, breaker space, conduit run, finish materials. The walk takes 20-30 minutes and the quote is written there.

If your address is in Georgetown, your electrical panels and circuit breakers job goes through the same Austin dispatch and the same crew that handles every other call out there. No call-center, no hand-off, no surprise sub.

Quote requests for electrical panels and circuit breakers in Georgetown go through the form below and route directly to the Austin shop.

02 - WORK FROM AUSTIN

Recent electrical panels and circuit breakers work from our Austin team.

Real installs across our Austin service area.

03 - REAL WORK IN GEORGETOWN

What we have actually done in Georgetown.

Specific evidence from electrical panels and circuit breakers jobs we have run in Georgetown. Not stock copy.

“For electrical panels and circuit breakers in Georgetown, the install is only as good as the wire dressing inside the panel. We do the boring stuff right because that is what holds up at the ten-year mark, not just the inspection.”
Project lead, Keil Electric

Neighborhood note

When customers in the Georgetown 78626 area plan electrical panels and circuit breakers, we walk the project against the real timeline, not the optimistic one. Permit cycles in Georgetown run a known pattern; utility coordination has known lead times; we sequence the work so the inspection card gets signed without a redo trip. Georgetown is in our middle coverage zone, so the schedule is reliable.

Permit and inspection

For electrical panels and circuit breakers in the Georgetown 78626 area, the AHJ is the local building department, and the inspection workflow is the standard Austin-area sequence: pull permit, schedule rough or final, pass inspection, close out. We track the cycle each Austin-metro city is currently enforcing, so the scope we write reflects the rules in force right now.

04 - WHAT CUSTOMERS SAY

Real reviews of our Austin team.

★ ★ ★ ★ ★ 5.0 121 Google reviews

“Gotta say that Keil Electric made a great first impression. Garrett was able to answer my questions about my GFCI outlets that kept failing and replaced them at a reasonable cost, including a replacement hot box for my network outlets that weren’t wired correctly when the hous...”

Raphael Alberto Ramos · 3 months ago

“Had to upgrade my electrical panel and I figured it would be a headache. But Garrett showed up on time and handled everything. The team was respectful of my home, cleaned up afterward, and finished earlier than expected. The new panel looks great and I feel much safer running ...”

Are you not entertained Moxley · 8 months ago

See all 121 reviews on Google

Permits

Permits and inspections

Not every job requires a permit. When the local AHJ requires one, we pull it, schedule the inspection, and stay with the job until it passes. No paperwork on you.

Warranty

What's covered

Lifetime warranty on the panel itself; 10-year on breakers. Parts and labor. Stays with the home and transfers to the next owner.

05 - WHO TO HIRE

Why hiring a licensed electrician matters.

For electrical panels and circuit breakers, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.

Keil Electric

A licensed electrician

Licensed electrician walks every job. Veteran-owned, family-run.

Permits pulled and inspections coordinated when required by the AHJ

5/10-year + lifetime warranty in writing. Parts and labor. Transfers with the home.

Fully insured + workers' comp on every crew

The price you sign is the price you pay

A handyman

Unlicensed for electrical

No state electrical license. Can do simple swaps but not panel work, rewires, or service upgrades.

No permits. Work won't pass inspection if the city audits it later.

No structured warranty. "Call me if something breaks" isn't enforceable.

If something they did causes a fire, your homeowner's insurance can deny the claim.

Cash discount may show up on the invoice.

DIY

Doing it yourself

Cheap, but only if everything goes right. Most electrical work involves load calc, code, and permitting.

A failed inspection means redoing the work. Selling the home later, the buyer's inspector flags it.

No warranty if something fails. Replacement is on you.

Live wiring is a real safety hazard. Most fatal home electrical accidents are DIY.

If you know what you're doing, fine. If you don't, call us first.

Across Georgetown, TX, Keil Electric runs electrical panels and circuit breakers as part of our regular Austin service area coverage. Each job follows the same scope process: a licensed electrician walks the work, writes a fixed-price quote, and runs the install with the same warranty as everywhere else we cover.

What we see for electrical panels and circuit breakers in Georgetown

Georgetown is one of the largest north Austin metro suburbs with a mix of pre-1900 historic downtown, mid-century neighborhoods, and post-2000 master-planned communities like Sun City. electrical panels and circuit breakers jobs span the full range, historic-home rewires, mid-century panel upgrades, suburban additions, and active-adult-community work for the large 55+ population.

How electrical panels and circuit breakers typically runs in Georgetown

Panel and breaker work across our service area covers the full range, repair on a single bad breaker, replacement of a recalled panel (FPE Stab-Lok, Zinsco, Challenger), service upgrades from 100A or 200A based on actual load, AFCI and GFCI breaker installs to current code, and main breaker replacement when the original fails. Each job starts with a real load calc or a real diagnostic, runs with manufacturer-spec parts matched to the panel listing, and closes with a written warranty on the install.

Permits and code in Texas

Austin metro cities pull permits through their own AHJs (the city of Austin uses Austin Energy and the city development services; outlying cities run through the county). The state adopts the National Electrical Code with Texas amendments. We pull the permit when the scope requires it, schedule any inspection, and close out the work in your file. Georgetown-specific permit notes go on the quote so you know what is required before any work begins.

Calls from this page reach the Austin team directly. Georgetown is part of our day-to-day coverage, dispatched from our Round Rock shop with the same crew that runs every other Austin-area job. After-hours emergencies are dispatched when capacity allows; routine jobs are usually scheduled within a few business days depending on parts and scope.

06 - FINANCING · WISETACK PARTNER

Spread the cost over time.

Pre-approval through Wisetack takes under 3 minutes. Soft credit check, no impact to your score.

0% APR for 3, 6, or 12 months (qualifying credit)
2–10 year low-interest plans for larger projects
Soft credit check, takes less than 3 minutes

Financing through our partner Wisetack. Loan terms, APR, and approval subject to underwriting. Not all applicants qualify.

Check your rate

Opens Wisetack in a new tab. Texas customers only.

Common questions for Electrical Panels and Circuit Breakers in Georgetown

Does Keil Electric upgrade electrical panels in Georgetown?

Yes. Whole-panel upgrade, service-entrance upgrades from 100A to 200A, and sub-panel additions in Georgetown are all handled by our Austin team. A licensed electrician walks every quote in person.

What does a panel upgrade cost in Georgetown?

Panel upgrades typically range based on service size, panel brand, length of the service-entrance run, and any utility coordination needed. We do a real load calculation and write the price before any work starts. The quote you sign is the bill you pay.

Do you replace Federal Pacific or Zinsco panels?

Yes. We replace known-recall panels (Federal Pacific Stab-Lok, Zinsco, Challenger) as whole-panel jobs. Both brands have documented failure modes and parts-availability issues, so swapping individual breakers does not solve the underlying risk.

How long does a panel upgrade take?

Most residential 200A service upgrades are a one-day install with the home down for several hours during the meter pull. Larger jobs or jobs with a long service-entrance run can take two days. We coordinate the utility schedule ahead of time.

Do you pull the permit?

Yes, on every panel job that needs one. We file the permit with the Georgetown building department (or local AHJ), schedule the rough and final inspections, and stay with the job through pass.

Is there a warranty?

Yes. Tiered written warranty: 5-year on breaker repair, 10-year on full panel installs, lifetime on the panelbox when paired with surge protection. Parts and labor, stays with the home.

07 - OTHER SERVICES IN GEORGETOWN