[ TX LIC #40645 · GEORGETOWN ] AUSTIN METRO

Georgetown, TX

Outlets, switches, and fixtures in Georgetown, TX

Licensed outlets, switches, and fixtures from our Austin shop for Georgetown homes and businesses. Real person on the line, licensed electrician on every job.

Request an estimate Read the scope

JOB · LOCAL TEAM

Outlets, Switches, and Fixtures

Georgetown, TX

Served by Keil Electric Austin

(888) 442-5345

TX License 40645

5.0 from 121 Google reviews

Direct answer

Keil Electric Austin provides outlets, switches, and fixtures in Georgetown, TX. Outlet replacement and relocation, switch installation and repair, GFCI and AFCI conversions, dimmer compatibility fixes, and fixture installation. Standard residential and commercial finish work.

Licensed Outlets, Switches, and Fixtures outlets, switches, and fixtures across Austin From the Keil Electric Austin licensed electricians

01 - SERVICE AREA

Georgetown service area.

From our Austin shop.

We dispatch from 1511 Brandi Ln Unit D, Round Rock, TX. Most days we're already in the area on another job. After-hours emergencies, we roll a truck.

Response time

Austin: Most days we're already in the area. Same-day appointments when capacity allows. After-hours emergencies dispatched when a licensed electrician is available, a real person at the local shop answers and tells you the ETA on the call.

Call now

If you are looking for outlets, switches, and fixtures in Georgetown, you are looking at the right team. We are Texas-licensed (#40645) and we have been running this kind of job in the Austin area for years. Outlets, Switches, and Fixtures is install work, not a phone-quote category. We come out, look at what is on the wall and behind it, and write the price against the actual scope.

Outlets, Switches, and Fixtures service for Georgetown addresses gets the same scope, same warranty, and same licensed-electrician walk we run on every other job in the Austin service area.

Quote requests for outlets, switches, and fixtures in Georgetown go through the form below and route directly to the Austin shop.

02 - WORK FROM AUSTIN

Recent outlets, switches, and fixtures work from our Austin team.

Real installs across our Austin service area.

03 - REAL WORK IN GEORGETOWN

What we have actually done in Georgetown.

Specific evidence from outlets, switches, and fixtures jobs we have run in Georgetown. Not stock copy.

“For outlets, switches, and fixtures in Georgetown, the install is only as good as the wire dressing inside the panel. We do the boring stuff right because that is what holds up at the ten-year mark, not just the inspection.”
Project lead, Keil Electric

Neighborhood note

When customers in the Georgetown 78626 area plan outlets, switches, and fixtures, we walk the project against the real timeline, not the optimistic one. Permit cycles in Georgetown run a known pattern; utility coordination has known lead times; we sequence the work so the inspection card gets signed without a redo trip. Georgetown is in our middle coverage zone, so the schedule is reliable.

Permit and inspection

For outlets, switches, and fixtures in the Georgetown 78626 area, the AHJ is the local building department, and the inspection workflow is the standard Austin-area sequence: pull permit, schedule rough or final, pass inspection, close out. We track the cycle each Austin-metro city is currently enforcing, so the scope we write reflects the rules in force right now.

04 - WHAT CUSTOMERS SAY

Real reviews of our Austin team.

★ ★ ★ ★ ★ 5.0 121 Google reviews

“Gotta say that Keil Electric made a great first impression. Garrett was able to answer my questions about my GFCI outlets that kept failing and replaced them at a reasonable cost, including a replacement hot box for my network outlets that weren’t wired correctly when the hous...”

Raphael Alberto Ramos · 3 months ago

“Had to upgrade my electrical panel and I figured it would be a headache. But Garrett showed up on time and handled everything. The team was respectful of my home, cleaned up afterward, and finished earlier than expected. The new panel looks great and I feel much safer running ...”

Are you not entertained Moxley · 8 months ago

See all 121 reviews on Google

Permits

Permits and inspections

Not every job requires a permit. When the local AHJ requires one, we pull it, schedule the inspection, and stay with the job until it passes. No paperwork on you.

Warranty

What's covered

5-year written warranty on switches, outlets, GFCIs, fixtures. Parts and labor. Stays with the home and transfers to the next owner.

05 - WHO TO HIRE

Why hiring a licensed electrician matters.

For outlets, switches, and fixtures, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.

Keil Electric

A licensed electrician

Licensed electrician walks every job. Veteran-owned, family-run.

Permits pulled and inspections coordinated when required by the AHJ

5/10-year + lifetime warranty in writing. Parts and labor. Transfers with the home.

Fully insured + workers' comp on every crew

The price you sign is the price you pay

A handyman

Unlicensed for electrical

No state electrical license. Can do simple swaps but not panel work, rewires, or service upgrades.

No permits. Work won't pass inspection if the city audits it later.

No structured warranty. "Call me if something breaks" isn't enforceable.

If something they did causes a fire, your homeowner's insurance can deny the claim.

Cash discount may show up on the invoice.

DIY

Doing it yourself

Cheap, but only if everything goes right. Most electrical work involves load calc, code, and permitting.

A failed inspection means redoing the work. Selling the home later, the buyer's inspector flags it.

No warranty if something fails. Replacement is on you.

Live wiring is a real safety hazard. Most fatal home electrical accidents are DIY.

If you know what you're doing, fine. If you don't, call us first.

Across Georgetown, TX, Keil Electric runs outlets, switches, and fixtures as part of our regular Austin service area coverage. Each job follows the same scope process: a licensed electrician walks the work, writes a fixed-price quote, and runs the install with the same warranty as everywhere else we cover.

What we see for outlets, switches, and fixtures in Georgetown

Georgetown is one of the largest north Austin metro suburbs with a mix of pre-1900 historic downtown, mid-century neighborhoods, and post-2000 master-planned communities like Sun City. outlets, switches, and fixtures jobs span the full range, historic-home rewires, mid-century panel upgrades, suburban additions, and active-adult-community work for the large 55+ population.

How outlets, switches, and fixtures typically runs in Georgetown

Outlet, switch, and fixture work covers installation of new devices (GFCI in wet locations, AFCI on dwelling-unit circuits, tamper-resistant in living, weather-resistant outdoors), relocation during renovations (cable rerouted, old box handled correctly), and repair of failed devices (backstabbed connections re-terminated, GFCI mechanisms tested, scorched receptacles and damaged boxes replaced). Each job follows the same flow: diagnose first, write the scope, install with code-compliant parts, test under load.

Permits and code in Texas

Austin metro cities pull permits through their own AHJs (the city of Austin uses Austin Energy and the city development services; outlying cities run through the county). The state adopts the National Electrical Code with Texas amendments. We pull the permit when the scope requires it, schedule any inspection, and close out the work in your file. Georgetown-specific permit notes go on the quote so you know what is required before any work begins.

Calls from this page reach the Austin team directly. Georgetown is part of our day-to-day coverage, dispatched from our Round Rock shop with the same crew that runs every other Austin-area job. After-hours emergencies are dispatched when capacity allows; routine jobs are usually scheduled within a few business days depending on parts and scope.

06 - FINANCING · WISETACK PARTNER

Spread the cost over time.

Pre-approval through Wisetack takes under 3 minutes. Soft credit check, no impact to your score.

0% APR for 3, 6, or 12 months (qualifying credit)
2–10 year low-interest plans for larger projects
Soft credit check, takes less than 3 minutes

Financing through our partner Wisetack. Loan terms, APR, and approval subject to underwriting. Not all applicants qualify.

Check your rate

Opens Wisetack in a new tab. Texas customers only.

Common questions for Outlets, Switches, and Fixtures in Georgetown

Does Keil Electric replace outlets and switches in Georgetown?

Yes. Outlet, switch, dimmer, and fixture work in Georgetown is standard scope. Our Austin team handles same-day or next-day scheduling depending on truck availability.

How much does it cost to replace an outlet?

Billed by hour plus parts. A standard outlet swap is a quick visit; multi-outlet jobs are bid by the project. The price is in writing before work starts.

Do you install GFCI and AFCI outlets?

Yes. We install both, including the AFCI/GFCI dual-function outlets where applicable. Where current code requires the upgrade, we replace with the code-compliant version and tell you up front.

Can you install a smart switch that needs a neutral?

Yes. We verify the box has a neutral wire (older homes often do not in switch boxes), and if not, we either pull a neutral, install a no-neutral-required switch, or recommend a different control approach. We tell you the path before quoting.

Will you install a fixture I bought?

Yes. Owner-supplied fixtures are common scope. We do not warranty owner-supplied parts (the manufacturer warranty applies); we warranty our install labor.

Is it warrantied?

5-year written warranty on outlet, switch, dimmer, and fixture installs. Parts and labor on parts we supply.

07 - OTHER SERVICES IN GEORGETOWN