[ TX LIC #40645 · GEORGETOWN ] AUSTIN METRO

Georgetown, TX

EV charger installation in Georgetown, TX

Licensed EV charger installation from our Austin shop for Georgetown homes and businesses. Real person on the line, licensed electrician on every job.

Request an estimate Read the scope

JOB · LOCAL TEAM

EV Charger Installation

Georgetown, TX

Served by Keil Electric Austin

(888) 442-5345

TX License 40645

5.0 from 101 Google reviews

Direct answer

Keil Electric Austin provides EV charger installation in Georgetown, TX. Level 1 and Level 2 home EV charger installs with proper panel-capacity check, dedicated circuit, and inspection. Works with Tesla, ChargePoint, JuiceBox, Wallbox, and most other major brands.

Licensed EV Charger Installation EV charger installation across Austin From the Keil Electric Austin licensed electricians

01 - SERVICE AREA

Georgetown service area.

From our Austin shop.

We dispatch from 1511 Brandi Ln Unit D, Round Rock, TX. Most days we're already in the area on another job. After-hours emergencies, we roll a truck.

Response time

Austin: Most days we're already in the area. Same-day appointments when capacity allows. After-hours emergencies dispatched when a licensed electrician is available, a real person at the local shop answers and tells you the ETA on the call.

Call now

EV charger installation in Georgetown spans the full range. Older mid-century homes need panel review and possibly an upgrade to support a Level 2 charger. Newer additions and post-2000 construction are typically panel-ready. We start with a load calculation per NEC 220 to confirm panel capacity, then recommend a path based on actual conditions. The charger size (32A, 40A, or 48A) is sized to the vehicle and household charging needs, not just to the maximum the panel could handle.

How sizing and the install path work. Every install starts with a real load calculation per NEC 220 to confirm the existing panel can carry the new continuous load. Most home installs land at 32 amps on a 40-amp circuit, 40 amps on a 50-amp circuit, or 48 amps on a 60-amp circuit, with the breaker sized for 125% of the continuous load per NEC 625.41. Plug-in (NEMA 14-50) installs cap at 40-amp chargers and stay portable; hardwired installs are required above 50 amps and many manufacturers prefer them for warranty purposes. NEC 210.8 GFCI requirements and NEC 110.26 working clearances apply at the panel and the disconnect location. We pull any required permit, schedule any inspection, and the install carries our written warranty.

02 - WORK FROM AUSTIN

Recent EV charger installation work from our Austin team.

Real installs across our Austin service area.

03 - REAL WORK IN GEORGETOWN

What we have actually done in Georgetown.

Specific evidence from EV charger installation jobs we have run in Georgetown. Not stock copy.

“For EV charger installation in Georgetown, the install is only as good as the wire dressing inside the panel. We do the boring stuff right because that is what holds up at the ten-year mark, not just the inspection.”
Project lead, Keil Electric

Neighborhood note

When customers in the Georgetown 78626 area plan EV charger installation, we walk the project against the real timeline, not the optimistic one. Permit cycles in Georgetown run a known pattern; utility coordination has known lead times; we sequence the work so the inspection card gets signed without a redo trip. Georgetown is in our middle coverage zone, so the schedule is reliable.

Permit and inspection

For EV charger installation in the Georgetown 78626 area, the AHJ is the local building department, and the inspection workflow is the standard Austin-area sequence: pull permit, schedule rough or final, pass inspection, close out. We track the cycle each Austin-metro city is currently enforcing, so the scope we write reflects the rules in force right now.

04 - WHAT CUSTOMERS SAY

Real reviews of our Austin team.

★ ★ ★ ★ ★ 5.0 101 Google reviews

“Had to upgrade my electrical panel and I figured it would be a headache. But Garrett showed up on time and handled everything. The team was respectful of my home, cleaned up afterward, and finished earlier than expected. The new panel looks great and I feel much safer running ...”

Are you not entertained Moxley · 7 months ago

“We had Garrett come out to install new lighting in our kitchen and fix a few switches that didn’t work. He was super knowledgeable and clearly takes pride in his work. He even noticed a potential fire hazard on another circuit and fixed it on the spot. Prices were fair and the...”

Adrienne R. · 7 months ago

See all 101 reviews on Google

Permits

Permits and inspections

Not every job requires a permit. When the local AHJ requires one, we pull it, schedule the inspection, and stay with the job until it passes. No paperwork on you.

Warranty

What's covered

5-year written warranty on EV chargers and motorized fans. Parts and labor. Stays with the home and transfers to the next owner.

05 - WHO TO HIRE

Why hiring a licensed electrician matters.

For EV charger installation, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.

Keil Electric

A licensed electrician

Licensed electrician walks every job. Veteran-owned, family-run.

Permits pulled and inspections coordinated when required by the AHJ

5/10-year + lifetime warranty in writing. Parts and labor. Transfers with the home.

Fully insured + workers' comp on every crew

The price you sign is the price you pay

A handyman

Unlicensed for electrical

No state electrical license. Can do simple swaps but not panel work, rewires, or service upgrades.

No permits. Work won't pass inspection if the city audits it later.

No structured warranty. "Call me if something breaks" isn't enforceable.

If something they did causes a fire, your homeowner's insurance can deny the claim.

Cash discount may show up on the invoice.

DIY

Doing it yourself

Cheap, but only if everything goes right. Most electrical work involves load calc, code, and permitting.

A failed inspection means redoing the work. Selling the home later, the buyer's inspector flags it.

No warranty if something fails. Replacement is on you.

Live wiring is a real safety hazard. Most fatal home electrical accidents are DIY.

If you know what you're doing, fine. If you don't, call us first.

Across Georgetown, TX, Keil Electric runs EV charger installation as part of our regular Austin service area coverage. Each job follows the same scope process: a licensed electrician walks the work, writes a fixed-price quote, and runs the install with the same warranty as everywhere else we cover.

What we see for EV charger installation in Georgetown

Georgetown is one of the largest north Austin metro suburbs with a mix of pre-1900 historic downtown, mid-century neighborhoods, and post-2000 master-planned communities like Sun City. EV charger installation jobs span the full range, historic-home rewires, mid-century panel upgrades, suburban additions, and active-adult-community work for the large 55+ population.

How EV charger installation typically runs in Georgetown

EV charger installation starts with the vehicle and how the homeowner uses it, daily commute miles, garage location, panel capacity. Charger sizing matches the use case (Level 1 for low-mileage, Level 2 for typical, dedicated 50A circuits for fast residential charging). Panel-capacity check confirms whether a panel upgrade is needed first. The install includes the dedicated circuit, the right NEMA receptacle (14-50 is common) or hardwired connection, GFCI protection where required, and inspection close-out.

Permits and code in Texas

Austin metro cities pull permits through their own AHJs (the city of Austin uses Austin Energy and the city development services; outlying cities run through the county). The state adopts the National Electrical Code with Texas amendments. We pull the permit when the scope requires it, schedule any inspection, and close out the work in your file. Georgetown-specific permit notes go on the quote so you know what is required before any work begins.

Calls from this page reach the Austin team directly. Georgetown is part of our day-to-day coverage, dispatched from our Round Rock shop with the same crew that runs every other Austin-area job. After-hours emergencies are dispatched when capacity allows; routine jobs are usually scheduled within a few business days depending on parts and scope.

06 - FINANCING · WISETACK PARTNER

Spread the cost over time.

Pre-approval through Wisetack takes under 3 minutes. Soft credit check, no impact to your score.

0% APR for 3, 6, or 12 months (qualifying credit)
2–10 year low-interest plans for larger projects
Soft credit check, takes less than 3 minutes

Financing through our partner Wisetack. Loan terms, APR, and approval subject to underwriting. Not all applicants qualify.

Check your rate

Opens Wisetack in a new tab. Texas customers only.

Common questions for EV Charger Installation in Georgetown

Does Keil Electric install EV chargers in Georgetown?

Yes. Level 1 and Level 2 home EV chargers in Georgetown are standard scope for our Austin team. Licensed electrician walks every install.

Do I need a panel upgrade before installing a Level 2 charger?

Sometimes. A 40A or 50A dedicated circuit pulls real load, and many older Georgetown homes are at panel capacity already. We do a real load calculation per NEC 220 before we quote. About a third of the homes we walk need a panel upgrade first.

What does an EV charger install cost?

Depends on panel capacity, distance from the panel to the charger location, and whether the charger is owner-supplied. The price is in writing before any work starts. We walk it and tell you the path before we quote.

Hardwired or plug-in?

For permanent installs we usually recommend hardwired. NEMA 14-50 receptacles are fine for portable chargers but require GFCI per recent NEC cycles, which adds cost and reduces reliability for some chargers. We walk you through the tradeoff.

Do you work with Tesla Wall Connector and JuiceBox?

Yes. We install Tesla Wall Connector, JuiceBox, ChargePoint, Wallbox, and most other major brands. Owner-supplied units are fine; we wire to the manufacturer spec.

Is there a warranty?

10-year written warranty on the install (panel, breaker, wire, connection). Parts and labor on parts we supply. Owner-supplied chargers carry the manufacturer warranty.

07 - OTHER SERVICES IN GEORGETOWN