[ CA LIC #1109913 · DEL MAR ] SAN DIEGO COUNTY

Del Mar, CA

Electrical Wiring Installation in Del Mar, CA

Request an estimate Read the scope

JOB · LOCAL TEAM

Electrical Wiring Installation

Del Mar, CA

Served by Keil Electric San Diego

(619) 771-1114

CA License 1109913

4.9 from 261 Google reviews

Direct answer

Keil Electric San Diego handles electrical wiring installation in Del Mar, CA from our Santee shop. Licensed (#1109913), written warranty on every install. Call (619) 771-1114 to reach the San Diego team directly.

Licensed Electrical Wiring Installation electrical wiring installation across San Diego From the Keil Electric San Diego licensed electricians

01 - SERVICE AREA

Del Mar service area.

From our San Diego shop.

We dispatch from 8733 Magnolia Ave #105, Santee, CA. Most days we're already in the area on another job. After-hours emergencies, we roll a truck.

Response time

San Diego: Most days we're already in the area. Same-day appointments when capacity allows. After-hours emergencies dispatched when a licensed electrician is available, a real person at the local shop answers and tells you the ETA on the call.

Call now

Electrical Wiring Installation in Del Mar, CA runs out of our Santee shop. The crew works the San Diego metro daily and covers Del Mar on the regular dispatch list. Most homeowners asking about electrical wiring installation want a clear quote, not a guess. We do the in-person walk so the price reflects your actual Del Mar install, not a generic line item.

Electrical Wiring Installation service for Del Mar addresses gets the same scope, same warranty, and same licensed-electrician walk we run on every other job in the San Diego service area.

To set up a real quote for electrical wiring installation at your Del Mar address, send a request through the form on this page or use the local number listed in the page header.

02 - WORK FROM SAN DIEGO

Recent electrical wiring installation work from our San Diego team.

Real installs across our San Diego service area.

03 - REAL WORK IN DEL MAR

What we have actually done in Del Mar.

Specific evidence from electrical wiring installation jobs we have run in Del Mar. Not stock copy.

“For electrical wiring installation in Del Mar, the install is only as good as the wire dressing inside the panel. We do the boring stuff right because that is what holds up at the ten-year mark, not just the inspection.”
Project lead, Keil Electric

Neighborhood note

When customers in the Del Mar 92014 area plan electrical wiring installation, we walk the project against the real timeline, not the optimistic one. Permit cycles in Del Mar run a known pattern; utility coordination has known lead times; we sequence the work so the inspection card gets signed without a redo trip. Del Mar is in our inner coverage zone, so the schedule is reliable.

Permit and inspection

For electrical wiring installation in Del Mar, the permitting AHJ is the local building department. California requires C-10 contractor licensing for most electrical work; we hold that, and we pull the permit ourselves. Title 24 documentation, inspection scheduling, and final sign-off are part of the project deliverable.

04 - WHAT CUSTOMERS SAY

Real reviews of our San Diego team.

★ ★ ★ ★ ★ 4.9 261 Google reviews

“Sebastian and his colleague did an excellent job installing three GFCI outlets in my bathrooms. Their work was extremely precise, and no drywall repair was needed. They were also very considerate about keeping costs down by choosing the most efficient wiring approach. Overall,...”

Guining aka Mike Shi · 4 months ago

“Six high bay lights in our lobby. Chris was very careful and covered the tile floor to ensure the lift did not cause any damage. Even went the extra step to make sure the lights were clean and the ceiling insulation was repainted flat black.”

Al Zemke · 3 months ago

See all 261 reviews on Google

Permits

Permits and inspections

Not every job requires a permit. When the local AHJ requires one, we pull it, schedule the inspection, and stay with the job until it passes. No paperwork on you.

Warranty

What's covered

Written warranty: 5-year on outlets, fixtures, and EV chargers; 10-year on wire and breakers; lifetime on panelboxes and surge protection. Parts and labor. Transfers with the home.

05 - WHO TO HIRE

Why hiring a licensed electrician matters.

For electrical wiring installation, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.

Keil Electric

A licensed electrician

Licensed electrician walks every job. Veteran-owned, family-run.

Permits pulled and inspections coordinated when required by the AHJ

5/10-year + lifetime warranty in writing. Parts and labor. Transfers with the home.

Fully insured + workers' comp on every crew

The price you sign is the price you pay

A handyman

Unlicensed for electrical

No state electrical license. Can do simple swaps but not panel work, rewires, or service upgrades.

No permits. Work won't pass inspection if the city audits it later.

No structured warranty. "Call me if something breaks" isn't enforceable.

If something they did causes a fire, your homeowner's insurance can deny the claim.

Cash discount may show up on the invoice.

DIY

Doing it yourself

Cheap, but only if everything goes right. Most electrical work involves load calc, code, and permitting.

A failed inspection means redoing the work. Selling the home later, the buyer's inspector flags it.

No warranty if something fails. Replacement is on you.

Live wiring is a real safety hazard. Most fatal home electrical accidents are DIY.

If you know what you're doing, fine. If you don't, call us first.

Across Del Mar, CA, Keil Electric runs electrical wiring installation as part of our regular San Diego service area coverage. Each job follows the same scope process: a licensed electrician walks the work, writes a fixed-price quote, and runs the install with the same warranty as everywhere else we cover.

What we see for electrical wiring installation in Del Mar

Del Mar is an upscale coastal community north of San Diego with substantial pre-1980 beach cottages, mid-century homes, and post-1990 high-end custom builds along the bluffs. electrical wiring installation jobs lean upscale: salt-air-resistant equipment, smart-home integration, multi-structure wiring on the larger bluff lots, and historic rewires of original beach cottages.

How electrical wiring installation typically runs in Del Mar

New wiring installation starts with sizing each circuit to the actual load. EV charger circuits run 40A or 50A on 6 AWG copper. Range circuits are 50A. Dryers are 30A. General-purpose receptacles are 20A on 12 AWG. We confirm the equipment specs, look up the wire and breaker in NEC tables, and route the cable per code (stapled within 12 inches of boxes, supported every 4.5 feet, nail plates where required). The rough-in inspection has to pass before drywall closes, and the final closes the work in your file.

Permits and code in California

San Diego County cities follow the California Electrical Code (CEC, based on NEC with state amendments) plus Title 24 Part 6 for energy compliance on lighting and other regulated loads. Permits run through the local AHJ, the city of San Diego, the county for unincorporated areas, or the relevant municipality. We pull the permit when required, walk any inspector, and document the close-out so future work has a clean paper trail.

Calls from this page reach the San Diego team directly. Del Mar is part of our day-to-day coverage, dispatched from our Santee shop with the same crew that runs every other San Diego-area job. After-hours emergencies are dispatched when capacity allows; routine jobs are usually scheduled within a few business days depending on parts and scope.

Common questions for Electrical Wiring Installation in Del Mar

Do I need a permit for new wiring?

In every jurisdiction we work, new circuits that originate at the panel require a permit. Adding a switch loop or extending an existing circuit sometimes does not. We confirm the permit requirement on the site walk and include it in the quote.

How long does a wiring install take?

Depends on the scope. A single new dedicated circuit is half a day. A finished-basement rough-in might be three to five days. Whole additions take longer because the schedule is paced by drywall, finish trades, and inspections.

Can you install wiring in finished walls?

Yes. We fish cable through finished walls when access is available from above or below, or by cutting strategic openings that are easy to patch. We document the openings and coordinate with whoever is patching.

Does new wiring trigger AFCI requirements?

Most new branch circuits in dwelling units are required to have AFCI protection per current NEC. We use AFCI breakers on all qualifying new circuits.

How do I know if my panel has space for new circuits?

We check available breaker spaces during the site walk. If the panel is full, options are tandem breakers (when the panel allows), a sub-panel installation, or a panel upgrade. We tell you in writing which path applies.

06 - OTHER SERVICES IN DEL MAR