Austin service
Lighting installation in Austin, TX
Licensed lighting installation from our Austin shop. Real person on the line, licensed electrician on every job.
LOCAL TEAM · AUSTIN
1511 Brandi Ln Unit D, Round Rock, TX 78681
(888) 442-5345
Mon-Fri 8:00 am - 8:00 pm · Sat-Sun by appointment
TX License 40645
from 101 Google reviews
Direct answer
Keil Electric Austin handles lighting installation for homes and businesses across the Austin metro. Lighting installation at Keil Electric covers interior fixture installation, recessed lighting, ceiling fans with light kits, outdoor lighting, and landscape lighting.
Response time
Austin: Most days we're already in the area. Same-day appointments when capacity allows. After-hours emergencies dispatched when a licensed electrician is available, a real person at the local shop answers and tells you the ETA on the call.
Call now
01
- WHAT WE LOOK AT
What we look at on a job like this
01
IECC adoption varies by AHJ
Austin and major suburbs adopt versions of IECC; smaller cities have less restrictive adoption.
02
Hill Country outdoor and landscape work
Extensive outdoor lighting on Hill Country properties uses low-voltage transformers and line-voltage runs.
03
Storm and lightning surge protection
Outdoor lighting circuits in this market benefit from surge protection at the panel.
04
Smart-switch and dimmer compatibility
Lutron, Hubitat, and similar systems integrated with verified LED-dimmer compatibility.
05
NEC 314.27 fan-rated boxes
Ceiling fans require fan-rated boxes per NEC 314.27(C) regardless of weight.
02
- WORK FROM AUSTIN
Recent work from the Austin team.
Real installs and service calls across our Austin coverage area.
Permits
Permits and inspections
Not every job requires a permit. When the local AHJ requires one, we pull it, schedule the inspection, and stay with the job until it passes. No paperwork on you.
Warranty
What's covered
5-year written warranty on lights, fixtures, ceiling fans. Parts and labor. Stays with the home and transfers to the next owner.
03
- TX SPECIFIC · AUSTIN METRO
What is different about lighting installation in Texas.
Some of what we do for lighting installation is shaped by the codes and conditions specific to Texas. Here is what tends to differ versus other states.
Code adoption in Texas
Texas adopts the National Electrical Code at the state level through the Texas Department of Licensing and Regulation, with most cities in the Austin metro adopting the most recent NEC cycle within a year or two of publication. Round Rock, Cedar Park, Pflugerville, and Austin proper each maintain their own permitting offices with slightly different inspection scheduling and form workflows. We track which cycle each AHJ in our coverage area is currently enforcing, so the scope we write for a job in Cedar Park is current to that city, not just current to "Texas." When a project crosses jurisdictions or sits in unincorporated county, we route the permit through the correct authority and tell you upfront which inspection cadence applies.
Hot-climate considerations
Central Texas summers run long and hot, and that affects lighting installation in ways that are easy to underestimate. Panels mounted on west-facing exterior walls run hotter all afternoon. Attic-mounted equipment derates per code because ambient attic temperatures regularly clear 130°F. AC compressors pull near-rated current for hours at a stretch through July and August, which puts more thermal cycling on terminations than the same equipment would see in a milder climate. We size conductors and breakers with that summer load profile in mind, not just the nameplate minimum. On older homes we look closely at terminations that may have loosened from years of heat cycling, those are a common cause of intermittent issues that get misdiagnosed elsewhere.
Severe weather and storm response
The metro sees thunderstorm hail, the occasional derecho, and the post-storm spike in generator and surge-protection demand that comes with each event. We keep enough surge-protection inventory at the shop to swap out a damaged whole-home unit same-day after a strike, and we know which generator and transfer-switch SKUs are realistic to source quickly when the supply chain tightens after a regional event. After the 2021 winter storm we also got a lot more careful about which loads customers actually need on backup, versus which loads end up on the generator only because nobody asked the question at install time.
04
- COVERAGE FROM AUSTIN
Cities where we run lighting installation.
We dispatch lighting installation across the Austin area from our shop. Pick your city for the local page, or "See all cities" for the full coverage list.
05
- WHO TO HIRE
Why hiring a licensed electrician matters.
For lighting installation, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.
Keil Electric
A licensed electrician
Licensed electrician walks every job. Veteran-owned, family-run.
Permits pulled and inspections coordinated when required by the AHJ
5/10-year + lifetime warranty in writing. Parts and labor. Transfers with the home.
Fully insured + workers' comp on every crew
The price you sign is the price you pay
A handyman
Unlicensed for electrical
No state electrical license. Can do simple swaps but not panel work, rewires, or service upgrades.
No permits. Work won't pass inspection if the city audits it later.
No structured warranty. "Call me if something breaks" isn't enforceable.
If something they did causes a fire, your homeowner's insurance can deny the claim.
Cash discount may show up on the invoice.
DIY
Doing it yourself
Cheap, but only if everything goes right. Most electrical work involves load calc, code, and permitting.
A failed inspection means redoing the work. Selling the home later, the buyer's inspector flags it.
No warranty if something fails. Replacement is on you.
Live wiring is a real safety hazard. Most fatal home electrical accidents are DIY.
If you know what you're doing, fine. If you don't, call us first.
Lighting installation in the Austin metro spans the full range from suburban kitchen and bath remodels to Hill Country custom-home full lighting plans. The Austin design aesthetic often involves recessed lighting plus accent fixtures plus outdoor landscape work, which means a single project can touch indoor, outdoor, and low-voltage landscape circuits.
No statewide energy code in Texas
Unlike California’s Title 24, Texas doesn’t have a single statewide energy code. Local AHJ adoption varies. Austin and most major suburbs adopt versions of IECC (International Energy Conservation Code) which has lighting power density and control requirements but less prescriptive than Title 24. Smaller cities in the surrounding counties have less restrictive adoption.
Hill Country outdoor and landscape lighting
Hill Country properties often have extensive outdoor and landscape lighting plans: path lights, accent uplights on oak trees, deck and patio lighting, dock lighting on lake-front properties (NEC 555 marina-adjacent rules where applicable). Low-voltage transformers handle most landscape lighting; line-voltage runs handle wall-mounted and post-mounted fixtures.
Storm-resistance considerations
Outdoor lighting in this market has to handle severe weather. Wind damage to wall-mounted fixtures, hail damage to glass elements, and surge damage from lightning all show up. Properly mounted fixtures with weather-rated housings, surge protection on the lighting circuits, and stainless or weather-resistant hardware all matter.
Smart switches and Hubitat / Lutron in newer homes
Newer Austin homes commonly have Lutron, Hubitat, or other smart-lighting systems installed at construction or added during renovation. We work with both systems and confirm dimmer-LED compatibility as a default step before any lighting install.
06
- FINANCING · WISETACK PARTNER
Spread the cost over time.
Pre-approval through Wisetack takes under 3 minutes. Soft credit check, no impact to your score.
- 0% APR for 3, 6, or 12 months (qualifying credit)
- 2–10 year low-interest plans for larger projects
- Soft credit check, takes less than 3 minutes
Financing through our partner Wisetack. Loan terms, APR, and approval subject to underwriting. Not all applicants qualify.
Check your rate
Opens Wisetack in a new tab. Texas customers only.
Common questions for Lighting installation in Austin, TX
Can recessed lights be installed in any ceiling?
Most ceilings allow recessed lighting, but joist spacing, insulation type, and fixture rating (IC vs non-IC) all matter. We confirm the ceiling type and verify clearance during the scoping visit.
Do you install homeowner-supplied light fixtures?
Yes. Customer-supplied fixtures are welcome. We do verify the fixture rating, the mounting support, and any required wiring changes before installation.
Does outdoor lighting need a different approach than interior?
Yes. Outdoor lighting requires wet- or damp-rated fixtures, weather-sealed wire connections, and GFCI-protected circuits. Landscape lighting often runs on low-voltage and uses a transformer to step down from line voltage.
Can ceiling fans be added where there is no fan box?
Often yes. We install fan-rated boxes that support the weight and movement of a ceiling fan. If the existing wiring is not rated for fan + light, we run the additional conductor as part of the install.
How are smart and dimmable lighting controls handled?
Both locations install smart switches and dimmers. We verify dimmer-bulb-fixture compatibility ahead of the install to avoid flicker, hum, or short bulb life.
Do you install smart lighting?
Yes. Smart switches, smart dimmers, scene controllers, motion-sensor switches, and platform-tied controls (Lutron Caseta, Leviton Decora Smart, Kasa, Hue) are all standard scope. Older homes often need a neutral wire pulled to the switch box first; we tell you the path before quoting.
Do you do ceiling fan installation?
Yes. Ceiling fan installation includes pulling a fan-rated box where the existing box is not rated, bracing to the joist, separate fan and light controls when wanted, and remote receiver setup. For homes with no overhead box, we pull a new circuit from the panel.
Will my LED bulbs dim properly with a new dimmer?
Sometimes. Not all LED bulbs dim cleanly on every dimmer. We verify bulb-and-dimmer compatibility before installing or recommend a tested combination.
Do you install can lights and recessed lighting?
Yes. Both retrofit (in finished ceilings) and new-construction recessed lighting are standard scope. We size for ceiling height, room layout, and bulb spec.
07
- REQUEST
Need lighting installation in Austin?
Tell us about the project. A licensed Austin licensed electrician walks the job in person and writes a real scope, backed by our written warranty.
Or call us direct
(888) 442-5345