Keil Electric San Antonio
EV Charger Installation in Alamo Heights
Master-licensed EV charger installation in Alamo Heights, TX. We walk the job, price it in writing, and back it with a warranty.
Keil Electric San Antonio handles EV charger installation in Alamo Heights, TX. At about 5 miles from downtown San Antonio, roughly 12 minutes, Alamo Heights schedules the same as an in-town call. Master-licensed, TX #40645, (830) 214-8444.
Alamo Heights service area.
From our San Antonio shop.
We dispatch from TX. Most days we're already in the area on another job. After-hours emergencies, we roll a truck.
San Antonio: Most days we're already in the area. Same-day appointments when capacity allows. After-hours emergencies dispatched when a licensed electrician is available, a real person at the local shop answers and tells you the ETA on the call.
Call nowAround Alamo Heights it is 1920s and 1930s houses on original services, with plaster walls that decide how the work gets routed. We size EV charger installation to that rather than to a standard assumption.
We quote EV charger installation in Alamo Heights after a licensed electrician walks the property, and the number holds for the scope as walked. At about 5 miles from downtown San Antonio, roughly 12 minutes, Alamo Heights schedules the same as an in-town call.
What we look at for this job
What we have actually done in Alamo Heights.
Specific evidence from EV charger installation jobs we have run in Alamo Heights. Not stock copy.
Around Alamo Heights it is 1920s and 1930s houses on original services, with plaster walls that decide how the work gets routed. We size EV charger installation to that rather than to a standard assumption.
This is permitted work in Alamo Heights. We pull the permit through the City of Alamo Heights, schedule the inspection, and coordinate any utility disconnect and reconnect. That is our job, not something we hand back to you.
Permits and inspections
Not every job requires a permit. When the local AHJ requires one, we pull it, schedule the inspection, and stay with the job until it passes. No paperwork on you.
What's covered
5-year written warranty on EV chargers and motorized fans. Parts and labor. Stays with the home and transfers to the next owner.
Why hiring a licensed electrician matters.
For EV charger installation, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.
A licensed electrician
Unlicensed for electrical
Doing it yourself
Spread the cost over time.
Pre-approval through Wisetack takes under 3 minutes. Soft credit check, no impact to your score.
- 0% APR for 3, 6, or 12 months (qualifying credit)
- 2–10 year low-interest plans for larger projects
- Soft credit check, takes less than 3 minutes
Financing through our partner Wisetack. Loan terms, APR, and approval subject to underwriting. Not all applicants qualify.
Common questions for EV Charger Installation in Alamo Heights
What size EV charger should I install?
Most homeowners install a 40A or 48A Level 2 charger, which gives 25-35 miles of range per hour. The right size depends on the vehicle, daily driving distance, and panel capacity. We size on the first call after asking about your driving and electrical service.
Do I need a dedicated circuit for my EV charger?
Yes. Every Level 2 EV charger requires its own dedicated circuit sized to the charger's amperage. We pull a new circuit from the panel to the charger location and install the breaker.
Can my existing panel handle an EV charger?
Often yes for 100A panels with available capacity, almost always yes for 200A. We run a load calculation that accounts for AC, water heater, and other major loads before confirming. If the panel cannot support the charger, we discuss an upgrade as a separate scope.
How long does EV charger installation take?
A typical home install runs 2-4 hours when the panel and run are straightforward. Longer runs, panel upgrades, or attic/crawl space routing extend the time and we confirm the timeline in the written quote.
Plug-in or hardwired - which is better?
Plug-in (NEMA 14-50) is more flexible and lets you take the charger when you move. Hardwired allows higher amperage on the same circuit and is required for some commercial installs. We confirm which path matches your charger and your goals.
Do you install Tesla Wall Connector?
Yes. We install the Tesla Wall Connector on dedicated 240V circuits sized to the breaker rating you choose (32A, 40A, 48A, or 60A on the third-generation unit). The Wall Connector is the cleanest Tesla install option for daily charging.
Do you install ChargePoint Home Flex, JuiceBox, or Wallbox?
Yes. ChargePoint Home Flex, JuiceBox 40, Wallbox Pulsar Plus, and Emporia Level 2 chargers are all in our standard install list. Owner-supplied units from any other major brand are fine too.
Can I just use a NEMA 14-50 outlet to charge?
Yes for portable chargers and Tesla Mobile Connector. NEMA 14-50 receptacles now require GFCI per recent NEC cycles, which can cause nuisance trips on some chargers. For permanent installs, hardwiring usually gives better reliability.
How much does an EV charger install cost?
Typical installs range based on panel capacity, distance from panel to charger location, and equipment selection. The price is in writing before any work starts. About a third of the homes we walk need a panel upgrade before a Level 2 install can happen safely.
Other services we run in Alamo Heights.
Same San Antonio team, same warranty, every job. Pick the next service you need.
Looking for something nearby?
Pick the page that matches what you need next.
Need an electrician for EV charger installation in Alamo Heights, TX?
Tell us about the project. A licensed San Antonio licensed electrician walks the job in person and writes a real scope, backed by our written warranty.