[ TX LIC #40645 · LEXINGTON ] AUSTIN METRO

Lexington, TX

Outlet and Switch Relocation in Lexington, TX

Request an estimate Read the scope

JOB · LOCAL TEAM

Outlet and Switch Relocation

Lexington, TX

Served by Keil Electric Austin

(888) 442-5345

TX License 40645

5.0 from 121 Google reviews

Direct answer

Keil Electric Austin handles outlet and switch relocation in Lexington, TX from our Round Rock shop. Licensed (#40645), written warranty on every install. Call (888) 442-5345 to reach the Austin team directly.

Licensed Outlet and Switch Relocation outlet and switch relocation across Austin From the Keil Electric Austin licensed electricians

01 - SERVICE AREA

Lexington service area.

From our Austin shop.

We dispatch from 1511 Brandi Ln Unit D, Round Rock, TX. Most days we're already in the area on another job. After-hours emergencies, we roll a truck.

Response time

Austin: Most days we're already in the area. Same-day appointments when capacity allows. After-hours emergencies dispatched when a licensed electrician is available, a real person at the local shop answers and tells you the ETA on the call.

Call now

We handle outlet and switch relocation across Lexington, TX as part of our Austin service area. Pricing outlet and switch relocation right means walking the job. The Lexington estimate runs on what your panel, run length, and finish work actually look like.

If your address is in Lexington, your outlet and switch relocation job goes through the same Austin dispatch and the same crew that handles every other call out there. No call-center, no hand-off, no surprise sub.

To set up a real quote for outlet and switch relocation at your Lexington address, send a request through the form on this page or use the local number listed in the page header.

02 - WORK FROM AUSTIN

Recent outlet and switch relocation work from our Austin team.

Real installs across our Austin service area.

03 - REAL WORK IN LEXINGTON

What we have actually done in Lexington.

Specific evidence from outlet and switch relocation jobs we have run in Lexington. Not stock copy.

“For outlet and switch relocation in Lexington, the install is only as good as the wire dressing inside the panel. We do the boring stuff right because that is what holds up at the ten-year mark, not just the inspection.”
Project lead, Keil Electric

Neighborhood note

When customers in the Lexington area plan outlet and switch relocation, we walk the project against the real timeline, not the optimistic one. Permit cycles in Lexington run a known pattern; utility coordination has known lead times; we sequence the work so the inspection card gets signed without a redo trip. Lexington is in our middle coverage zone, so the schedule is reliable.

Permit and inspection

For outlet and switch relocation in the Lexington area, the AHJ is the local building department, and the inspection workflow is the standard Austin-area sequence: pull permit, schedule rough or final, pass inspection, close out. We track the cycle each Austin-metro city is currently enforcing, so the scope we write reflects the rules in force right now.

04 - WHAT CUSTOMERS SAY

Real reviews of our Austin team.

★ ★ ★ ★ ★ 5.0 121 Google reviews

“Gotta say that Keil Electric made a great first impression. Garrett was able to answer my questions about my GFCI outlets that kept failing and replaced them at a reasonable cost, including a replacement hot box for my network outlets that weren’t wired correctly when the hous...”

Raphael Alberto Ramos · 3 months ago

“Had to upgrade my electrical panel and I figured it would be a headache. But Garrett showed up on time and handled everything. The team was respectful of my home, cleaned up afterward, and finished earlier than expected. The new panel looks great and I feel much safer running ...”

Are you not entertained Moxley · 8 months ago

See all 121 reviews on Google

Permits

Permits and inspections

Not every job requires a permit. When the local AHJ requires one, we pull it, schedule the inspection, and stay with the job until it passes. No paperwork on you.

Warranty

What's covered

Written warranty: 5-year on outlets, fixtures, and EV chargers; 10-year on wire and breakers; lifetime on panelboxes and surge protection. Parts and labor. Transfers with the home.

05 - WHO TO HIRE

Why hiring a licensed electrician matters.

For outlet and switch relocation, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.

Keil Electric

A licensed electrician

Licensed electrician walks every job. Veteran-owned, family-run.

Permits pulled and inspections coordinated when required by the AHJ

5/10-year + lifetime warranty in writing. Parts and labor. Transfers with the home.

Fully insured + workers' comp on every crew

The price you sign is the price you pay

A handyman

Unlicensed for electrical

No state electrical license. Can do simple swaps but not panel work, rewires, or service upgrades.

No permits. Work won't pass inspection if the city audits it later.

No structured warranty. "Call me if something breaks" isn't enforceable.

If something they did causes a fire, your homeowner's insurance can deny the claim.

Cash discount may show up on the invoice.

DIY

Doing it yourself

Cheap, but only if everything goes right. Most electrical work involves load calc, code, and permitting.

A failed inspection means redoing the work. Selling the home later, the buyer's inspector flags it.

No warranty if something fails. Replacement is on you.

Live wiring is a real safety hazard. Most fatal home electrical accidents are DIY.

If you know what you're doing, fine. If you don't, call us first.

Across Lexington, TX, Keil Electric runs outlet and switch relocation as part of our regular Austin service area coverage. Each job follows the same scope process: a licensed electrician walks the work, writes a fixed-price quote, and runs the install with the same warranty as everywhere else we cover.

What we see for outlet and switch relocation in Lexington

Lexington is a small Lee County town with older small-town housing and surrounding rural acreage. outlet and switch relocation jobs typically involve older home service upgrades, agricultural-property wiring, and rural-feeder issues common to longer utility drops.

How outlet and switch relocation typically runs in Lexington

Relocations almost always coincide with renovations: kitchen islands moving, bathrooms reconfiguring, a built-in covering an existing outlet. We map the old and new positions against the construction plan, reroute cable through the wall cavity (or run new from the panel when needed), and install a new code-compliant box at the new location. The old box gets handled correctly, listed junction box at the splice if cable continues onward, or full removal of the cable run back to the source. Drywalling over a live cable is a code violation and a fire risk; we always either install an accessible junction or remove the cable.

Permits and code in Texas

Austin metro cities pull permits through their own AHJs (the city of Austin uses Austin Energy and the city development services; outlying cities run through the county). The state adopts the National Electrical Code with Texas amendments. We pull the permit when the scope requires it, schedule any inspection, and close out the work in your file. Lexington-specific permit notes go on the quote so you know what is required before any work begins.

Calls from this page reach the Austin team directly. Lexington is part of our day-to-day coverage, dispatched from our Round Rock shop with the same crew that runs every other Austin-area job. After-hours emergencies are dispatched when capacity allows; routine jobs are usually scheduled within a few business days depending on parts and scope.

06 - FINANCING · WISETACK PARTNER

Spread the cost over time.

Pre-approval through Wisetack takes under 3 minutes. Soft credit check, no impact to your score.

0% APR for 3, 6, or 12 months (qualifying credit)
2–10 year low-interest plans for larger projects
Soft credit check, takes less than 3 minutes

Financing through our partner Wisetack. Loan terms, APR, and approval subject to underwriting. Not all applicants qualify.

Check your rate

Opens Wisetack in a new tab. Texas customers only.

Common questions for Outlet and Switch Relocation in Lexington

How much does it cost to move an outlet?

A short relocation in the same wall cavity is a small job. Longer reroutes through finished walls or to new circuits cost more. We quote per relocation after the site walk.

Can you move a kitchen outlet during a renovation?

Yes, and this is a common request. Kitchen counter receptacles often move when the layout changes. We relocate while maintaining the GFCI protection and counter-spacing requirements per NEC.

What happens to the old outlet location?

We remove the old device, splice in an accessible junction box if the cable continues onward, or remove the cable back to the source. The old location is patched by drywall.

Do I need to be there during the work?

Not for the rough-in. We need access to the wall and panel. The trim work after drywall closes also requires interior access. We schedule with you.

Can you relocate a hardwired light fixture too?

Yes. Light fixture relocations follow the same logic as outlets and switches: reroute the cable to the new ceiling box, install a code-compliant fixture box, and trim out the new fixture.

07 - OTHER SERVICES IN LEXINGTON