Keil Electric Austin handles electrical panel upgrade in Cedar Park, TX from our Round Rock shop. Licensed (#40645), written warranty on every install. Call (888) 442-5345 to reach the Austin team directly.
Cedar Park service area.
From our Austin shop.
We dispatch from 1511 Brandi Ln Unit D, Round Rock, TX. Most days we're already in the area on another job. After-hours emergencies, we roll a truck.
Austin: Most days we're already in the area. Same-day appointments when capacity allows. After-hours emergencies dispatched when a licensed electrician is available, a real person at the local shop answers and tells you the ETA on the call.
Call nowIf you are looking for electrical panel upgrade in Cedar Park, you are looking at the right team. We are Texas-licensed (#40645) and we have been running this kind of job in the Austin area for years. For electrical panel upgrade in Cedar Park the variation between two jobs can be significant: panel age, breaker space, conduit run, finish materials. The walk takes 20-30 minutes and the quote is written there.
Scheduling in Cedar Park runs on the same calendar as the rest of the Austin area. The crew is dispatched out of the shop and we hold the appointment window we book.
Quote requests for electrical panel upgrade in Cedar Park go through the form below and route directly to the Austin shop.
Recent electrical panel upgrade work from our Austin team.
Real installs across our Austin service area.
What we have actually done in Cedar Park.
Specific evidence from electrical panel upgrade jobs we have run in Cedar Park. Not stock copy.
“On a typical electrical panel upgrade job in Cedar Park, the customer thinks the issue is one thing, and the actual root cause is something different. Our job is to find the real cause, not the easy answer.”
When Cedar Park customers reach out about electrical panel upgrade, the first conversation is about scope and timeline, not just price. We tell you the version that fits the project, the version that does not, and where the breakpoints actually sit. The Austin shop runs trucks through Cedar Park regularly, so the install timing usually lines up with our existing schedule rather than waiting on a one-off trip.
For permits in the Cedar Park 78613 area, the Cedar Park building department is our point of contact. We have been pulling permits in the Austin metro long enough that the inspectors know our work, which usually shortens the close-out cycle. electrical panel upgrade permits typically run on a 1-2 week scheduling pattern depending on inspector load.
Real reviews of our Austin team.
“Gotta say that Keil Electric made a great first impression. Garrett was able to answer my questions about my GFCI outlets that kept failing and replaced them at a reasonable cost, including a replacement hot box for my network outlets that weren’t wired correctly when the hous...”
“Had to upgrade my electrical panel and I figured it would be a headache. But Garrett showed up on time and handled everything. The team was respectful of my home, cleaned up afterward, and finished earlier than expected. The new panel looks great and I feel much safer running ...”
Permits and inspections
Not every job requires a permit. When the local AHJ requires one, we pull it, schedule the inspection, and stay with the job until it passes. No paperwork on you.
What's covered
Written warranty: 5-year on outlets, fixtures, and EV chargers; 10-year on wire and breakers; lifetime on panelboxes and surge protection. Parts and labor. Transfers with the home.
Why hiring a licensed electrician matters.
For electrical panel upgrade, here's the honest comparison. We'd tell you the same thing if we weren't trying to win the job.
A licensed electrician
Unlicensed for electrical
Doing it yourself
Across Cedar Park, TX, Keil Electric runs electrical panel upgrade as part of our regular Austin service area coverage. Each job follows the same scope process: a licensed electrician walks the work, writes a fixed-price quote, and runs the install with the same warranty as everywhere else we cover.
What we see for electrical panel upgrade in Cedar Park
Cedar Park is one of the largest Austin suburbs with mostly post-1995 master-planned subdivisions, almost all with 200A service standard. electrical panel upgrade jobs in Cedar Park lean toward newer-construction additions: EV charger installs (a high-volume scope here), whole-home generators, smart-home wiring, and panel additions when an addition or pool pushes load past existing capacity.
How electrical panel upgrade typically runs in Cedar Park
Panel upgrades start with a real load calc against actual planned loads, square footage, kitchen and laundry, HVAC, EV charger if applicable, generator if applicable, future expansion. Most older homes (1960s-1970s) have 60A or 100A service that overshoots modern usage the moment you add an EV charger or central AC. The upgrade involves a planned utility cut and reconnect (typically four to six hours of power-down), new main panel and breakers, grounding electrode system updates if needed, surge protection at the service entrance, and a new permit pulled and inspected. Service entrance conductor gets replaced when the existing wire is undersized for the new amperage.
Permits and code in Texas
Austin metro cities pull permits through their own AHJs (the city of Austin uses Austin Energy and the city development services; outlying cities run through the county). The state adopts the National Electrical Code with Texas amendments. We pull the permit when the scope requires it, schedule any inspection, and close out the work in your file. Cedar Park-specific permit notes go on the quote so you know what is required before any work begins.
Calls from this page reach the Austin team directly. Cedar Park is part of our day-to-day coverage, dispatched from our Round Rock shop with the same crew that runs every other Austin-area job. After-hours emergencies are dispatched when capacity allows; routine jobs are usually scheduled within a few business days depending on parts and scope.
Spread the cost over time.
Pre-approval through Wisetack takes under 3 minutes. Soft credit check, no impact to your score.
- 0% APR for 3, 6, or 12 months (qualifying credit)
- 2–10 year low-interest plans for larger projects
- Soft credit check, takes less than 3 minutes
Financing through our partner Wisetack. Loan terms, APR, and approval subject to underwriting. Not all applicants qualify.
Common questions for Electrical Panel Upgrade in Cedar Park
Do I need to upgrade from 100A to 200A?
You need to if your load calc exceeds your current service capacity. Most homes built before 1985 have 100A or 60A service and exceed it the moment you add an EV charger, a hot tub, central AC, or a whole-home generator. We run a real load calc and tell you in writing whether the upgrade is required or recommended.
How much does a panel upgrade cost?
Cost depends on amperage (200A), whether the service entrance conductor needs replacement, the panel brand and breaker count, grounding updates, and the utility coordination required. We quote in writing after the site walk so the number is fixed before work starts.
How long is the power off during a panel upgrade?
Typically four to six hours during the utility cut and reconnect window. We schedule the cut early, complete the panel swap, and call for the utility reconnect once the inspection clears. Some larger upgrades or service-entrance changes run longer.
Do you pull the permit for a panel upgrade?
Yes. Service upgrades require a permit in every jurisdiction we work, and we pull it in the homeowner or property owner name. We schedule any inspection and the utility reconnect, and close the permit when the the work is complete.
Will my existing breakers transfer to the new panel?
Sometimes. If the existing breakers are the same brand and current generation, we can transfer the compatible ones. AFCI and GFCI breakers usually transfer cleanly when the manufacturer is the same. Older, brand-mismatched, or recalled breakers (FPE Stab-Lok, Zinsco) get replaced with new code-compliant breakers.
Other services we run in Cedar Park.
Same Austin team, same warranty, every job. Pick the next service you need.
Looking for something nearby?
Pick the page that matches what you need next.
Need an electrician for electrical panel upgrade in Cedar Park, TX?
Tell us about the project. A licensed Austin licensed electrician walks the job in person and writes a real scope, backed by our written warranty.